2012 Edgebander - Brandt Ambition 1110
Very compact Homag Brandt Ambition 1110 Edgebander Used 2012. REF# 1891BM.
Located in Ontario at our Brighton Woodworking Machinery Warehouse in Uxbridge, 20min E of 404 on Davis Drive.
|Model||Ambition 1110 (KDN110)|
|Electrics||230/400V (with transformer for 600V) / 3 Ph / 60 Hz|
|Weight||approx 1900 lbs|
|Shipping dimensions||12ft x 3ft x 6ft high|
|Condition info||Very Good|
016" to 1/8" Maximum Edgebanding Thickness Capacity (Coil or Strip)
Edgeband Length: Strips 9" Minimum 5/16" Min. to 2" Max. Panel Thickness
Minimum Panel Lenght: 5-1/2"
Minimum Panel Width: 2-3/4"
Edgeband Height: 5/16 to 1-5/8"
Electronic Easy Control w/ Backlit LCD Display
Automatic Magazine for Strip and Coil Feeding
Hot Melt Glue Pot w/ 12 Minute Heat up Time
Automatic Temperature Reduction Feature (Lowers the Glue Temperature if no Panel is Run Over a 15 Minute Span)
Guillotine for Cutting up to 3mm PVC from the Coil
Pressure Station w/ (1) Motorized Pressure Roller plus (2) Additional Idle Pressure Roller w/ Digital Setting System
1/4 HP 12,000 RPM Double Motor end Trim .33HP
Top and Bottom Profile Quick Change Scraping Unit
Digital on Top Pressure Beam for Height Indication
Adjustable Infeed Fence w/ Digital Readout Automatic Height Adjustment w/ Top Pressure Beam for all Work Stations
Digitals on Top and Bottom Trim Station
Dust Extraction: (4) 80mm Outlets and (1) 100mm Outlet, 1600 CFM Required
Compressed Air Connection: 6 Bar (85 psi) Isolation Transformer w/ Variable Infeed Voltage for Balancing all 3 Phases of Incoming Power
Machine Weight: 1,650 lbs.
Machine Dimensions: 12'1" Long X 4' Wide
Amperage Required @230 volt: 30 amps